Polycom RMX 2000 Installation & Configuration Manual page 3

Product Registration and Activation Key Retrieval
Before starting the initial configuration process, register your RMX at
the Polycom Resource Center website and download the product
activation key file to the computer you will use for the configuration:
1
Using a Web browser, connect to www.polycom.com.
2
In the Services section, click the Product Registration link.
3
If required, select to open a New User Account or enter your User
ID and Password and then click Sign In.
4
Follow the on-screen instructions to complete product registration.
Write down the Product Activation Key number or copy it for later.
Initial RMX Configuration
The system is shipped with the following default IP addresses:
• Control unit IP address – 192.168.1.254
• Shelf Management IP Address – 192.168.1.252
• Control unit subnet mask – 255.255.255.0
• Default Router IP Address – 192.168.1.1
When the RMX is installed for the first time, you must change the
default IP addresses to your local network settings. This can be done by
modifying the default settings in the USB key shipped with the unit
using the LAN Configuration Utility and uploading them to the RMX.
1
Plug the USB key into a PC.
2
Double-click LanConfigUtility.exe to start the utility.
3
Modify the required network parameters in the utility's dialog box
using the information supplied by your network administrator.
4
Click OK.
5
Insert the USB key with the modified IP addresses in the USB port
on the back panel.
6
Power the RMX On.
The parameters in the lan.cfg file are uploaded from the USB key to
the RMX's memory and applied during the power-up sequence.
3