Table of Contents
Advertisement
EXAMPLE: CURRENT TIME 01:09 PM
START Button
START display
(QSR START TIME)
1 press
01:30 PM
2 presses
02:00 PM
3. Press "QSR-LENGTH"
button to preset the length
of recording in 30-minute increments for up to 9
hours
and then to "END"
(the recording
will
continue until the end of the tape.)
4. Press "POWER"
ON/OFF
button to OFF. The
TIMER indication "(_"
will appear on the Display.
NOTES:
• The recording
time can be extended
any time
during "QSR" by pressing "LENGTH" button.
Press "QSR LENGTH" button to reset the length
of recording in 30 minute increments for up to 9
hours
and then to "END"
(the recording
will
continue until the end of the tape).
• To change
the "QSR"
program,
the previous
information must be cleared first.
• If "QSR" and the program timer recording overlap,
the former will override the latter.
NOTES:
e The timer display will
show the present
time
during Quick Set Recording.
You may change the duration
by pressing
the
QSR LENGTH button repeatedly.
Select the length time within 5 seconds, otherwise
the display will return to the current position.
During Quick Set Recording, you can not change
the Channel of the VCR.
If you want to view another channel,
Press the
VCR/TV button to TV mode, and then select the
channel
to be viewed
with the TV's channel
selector.
RECALLING
THE QSR SE'n'ING
Press the "QSR LENGTH" or "START" button, and
the recalled QSR setting will be displayed
on the
screen. The recalled QSR setting will automatically
return to the current position in 5 seconds.
NOTE:
To recall
the recording
time,
press the
LENGTH button only once.
If you press this button
twice or more, the recording time will be changed, if
power on.
TO CANCEL THE QSR SETTING
1. Press "LENGTH" button until the display reads
"0H00". The display
will return to the current
position and "QSR" has been now cleared.
2. Press the "POWER" ON/OFF button to stop the
VCR during QSR operation.
- 45 -
Advertisement
Table of Contents
