Recording While You Are Away - Sears LXI series 580.53484390 Owner's Manual

RECORDING WHILE YOU ARE AWAY (You can use
Programmable Timer or VCR Plus+)
Be sure that the clock is set to the correct time.
(Refer to "CLOCK SETTING" on page 26.)
1. Insert the cassette.
NOTE: Before starting check that the erase
prevention tab is not missing. If it is removed,
recording will not start.
2. Set the program timer using the MENU button.
Refer to "PROGRAM TIMER SETTING" on pages
30 through 34 or use VCR Plus+ on page 35
through 43.
3. Press "POWER" ON/OFF button to OFF. The
TIMER indication " Q " will appear on the
Display.
NOTES:
1. If the erase prevention tab is removed, the
cassette is ejected automatically and the
" _-$ " indication will flash. Stick a piece of
cellophane tape over the erase prevention hole
on the cassette to enable recording.
2. The " _-$ " indication will flash if a cassette is
not inserted.
"(_)" Indication
"POWER" ON/OFF Button
Number Buttons
"INPUT SELECT" Button
Mu_ voL o._J_,_m
. °00
(cD cD cD)
D ® ® ® 1
® ® ®,,
®®_
@-l®I o
_j
4. The recording will start and the "(_) " and the
" PE_ " indications will appear at the time you
have programmed.
NOTES:
1. When the TIMER indication is on, your VCR can
not be operated manually (except POWER
button).
2. If the tape runs out (if the end of the tape is
reached) during timer recording, the mode will
change automatically to STOP, REWIND and
EJECT in this order. At that point, power will
cease to be supplied to prevent the recorded tape
from being overlapped. You can continue timer
recording within programmed time when a new
tape is inserted.
3. If the clock displays " : " it indicates that
there has been a power interruption and the Time
and Programming need to be reset.
4. To stop the VCR during Timer Recording, press
"POWER" ON/OFF button OFF.
- 29 -