Sears LXI series 580.53484390 Owner's Manual page 25

QSR BUTTONS
Quick Set Recording (QSR) allows you to record
one program for up to 9 hours without using the
program timer.
--QSR LENGTH BUTTON
Used to select the length of the recording time.
--QSR START BU'R'ON
Used to select the QSR start time setting.
"100" BU'I'I'ON
Use to select TV channels with number 100 or
above. Press "100", "2" and "3" in this order to select
channel 123.
Press "100", "0" and "5" for channel 105.
"SLOW" BUTTONS
Press "SLOW" button during play mode and the tape
is played back in the forward direction about 1/6 to
1/32 times slower than the normal speed (SP or EP
recorded tape). When you press "SLOW V" (down)
button, the speed becomes slower. When you press
"SLOW A" (up) button, the speed becomes faster.
FRAME ADVANCE BUTTON
While viewing a still picture, press this button to
advance a picture one frame at a tir
INPUT SELECT BUTTON (TU/SC/AV)
TUNER: (TU)
To record signals coming from the built-in tuner_
(Video and Audio).
SIMULCAST: (SC)
To record the video signals from the built-in tuner
and the audio signals from the AUDIO IN terminals.
Use this position when FM simulcast (TV+ FM)
recording is desired.
AUDIONIDEO: (AV)
To record signals coming from the VIDEO IN and
AUDIO IN terminals.
NOTE: This VCR can be used as an Audio deck
when INPUT Select button is in AV position.
FOR RECORDING
Input Select
Button Position
Input Signals
normal audio
(on mono
audio track)
Hi-Fi
Audio
Video
VCR VCR VCR
TUNER TUNER TUNER TUNER
VCR VCR AUDIO/
SIMULCAST
TUNER TUNER VIDEO
AUDIO/VIDEO AUDIO/ AUDIO/ AUDIO/
VIDEO VIDEO VIDEO
ADD/ERASE BUTTON
Used to add or erase a selected channel memory.
- 24 -
POWER VCR "IV TVPRESET
MUTE VOL CHANNEL
Toj0
@
CLOCK/COUNT
REMAIN RESET VCR Plus+
CLEAR/
_ENU MONITOR DISPLAY
CD O
® ®
@ ®
® ®
TVNCR
O
O O
VlS8 MARK