Sears LXI series 580.53484390 Owner's Manual page 34

_) Press four digits, two for the start month and two more
for the start date, (for example, "0" "9" "0" "2" to begin
recording on September 2). The year and day of the
week are displayed automatically.
NORMALPROGRAM
PROGRAM 1
CH 04 SPEED SP
START TIME 06:00 PM
STOP TIME 07:30 PM
START DATE 09/02/93
THU
TO END PUSH MENU
NOTES:
To change an incorrect entry, or an undesired entry, proceed as follows;
1. Press "CLEAR" button repeatedly until the digit to be changed flashes.
2. Enter the correct number.
(D Press "MENU" to enter your program and return to the
menu display.
If the program preset time is past, the "PAST TIME
PROGRAMMED" message will blink on the screen.
Return to the incorrect program and reprogram it with
the correct time.
NORMALPROGRAM
PROGRAM 1
CH 04 SPEED SP
START TIME 01:00 PM
STOP TIME 01:30 PM
START DATE 09/01/93
\ I I I I I I WED /
--PAST TIME PROGRAMMED-
/ ITO ENDIPUSH MENU \
11_Press "MENU" again to return to the main menu display.
Additional program may be entered by repeating steps _) - 1_).
If you are finished programming and you want to set the VCR to record the programs you have entered, a)
make sure you have inserted a tape in the machine, and b) press the POWER button to OFF ('rimer mark
Tl_he appears).
VCR is now set to record the preset programs.
CHECKING THE TIMER PROGRAM
Program can be checked whenever the VCR is turned on.
1. Press "MENU" on the remote control to display the
menu.
2. Press "5" to review the program. (Program Review).
The program review menu will appear on the TV
screen.
3. Press "5" again if you want to review the next program
information.
4. When you are finished, press "MENU" again.
NORMALPROGRAM
PROGRAM 1
CH04 SPEED SP
START TIME 06:00 PM
STOP TIME 07:30 PM
START DATE 09/02/93
THU
TO CONTINUE PUSH NO.5
TO ERASE PUSH CLEAR
TO END PUSH MENU
- 33 -