Sears LXI series 580.53484390 Owner's Manual page 33

_) Press two digits for the channel to be recorded
(for example, "0" "4" for channel 4). The display
will prompt you to select a recording speed.
NORMAL PROGRAM
PROGRAM 1 \ I /
OH 04 SPEED ....
\ I I I I I //1\
--SP=I LP=2 EP=3--
AUTO=4 I I \
/I I I
TO END PUSH MENU
_) Press a digit from "1" to "4" on the remote control
to select the recording speed you want program
("1" for SP, "2" for LP, "3" for EP, "4" for AUTO
mode).
NOTE: If you select the "AUTO" mode, the
"AUTO" mode automatically determines how
much tape is left and switches speed according.
The "AUTO" mode starts recording at SP speed,
but if it finds out there is not enough tape left to
complete the programmed recording, it switches
over to EP speed.
There will be some distortion in picture and
sound at the point where speed is switched.
(for example, "1" for SP) The display will then
prompt you to enter the recording start time.
NORMALPROGRAM
PROGRAM 1
CH04 SPEED SP
START TIME \1 /
/1\
TO END PUSH MENU
_) Press five digits, two for the hour and two more
for the minute and one more for AM or PM (for
example, "0" "6" "0" "0" "2" for 6:00 PM). Press
"1" for AM or "2" for PM. The display will prompt
you to select the stop time.
NOTE: Always press "0" before a single digit
hour and minute.
NORMAL PROGRAM
PROGRAM 1
CH 04 SPEED SP
START TIME 06:00 PM
STOP TIME -_L/_ ....
/l\
TO END PUSH MENU
(D Press five digits, two for the hour and two more
for the minute and one more for AM or PM (for
example, "0" "7" "3" "0" "2" for 7:30 PM).
NOTE: The present month, day and year for the
DATE (for example, 090193 for September 1, to
change it at step 13).
NORMALPROGRAM
PROGRAM 1
CH 04 SPEED SP
START TIME 06:00 PM
STOP TIME 07:30 PM
\1/
START DATE --09/01/93
/ I_!/ED
TO END PUSH MENU
- 32 -