Table of Contents
Advertisement
_TV CONTROL BUTTONS
These buttons control the -IV volume up/down and
muting.
CLOCK/COUNT
REMAIN
RESET
¢CD CD
CLEAR/
MENU
MONITOR
CD
CD
® ®
® ®
(9 ®
@ @
VCR Plus+
cD)- :
DISPLAY
CD
®
• MUTE BUTTON
To turn the sound off. Press again and the sound
will return.
• VOLUME BUTTONS (UP/DOWN)
Press either VOLUME
UP or DOWN button to
change the sound level.
rr'l
"EJECT" BUTTON
Press this button to eject a cassette which is loaded
in the VCR.
NOTE: If this button is pressed, even when the VCR
is turned off, the power will turn on automatically and
the cassette will be ejected and then the power will
be turned off automatically. (This automatic function
eliminates the need for pressing "POWER" ON/OFF
button.)
i ....................
VCR Plus+ BUTTON
Press the VCR Plus+ button to display the program
menu on the TV screen for the VCR Plus + pro-
gramming.
®
"VCR/'rv"
SELECTOR
__"-
Selects the program for viewing on your "IV. The
.
__'_-
"VCR" position
(appears the "
_
" indication)
®
ALr'rOTRK.
TRACKING
0/.LOCK)
1
O
("
")/
v <D-
/
%.v%.. :.
F ......
--_
SR_
',O 00!O/
supplies a signal to your
TV on Channel
3 or 4
depending on the RF Channel Select Switch setting.
With the PLAY (x2) button pressed, the recorded
tape
program
is supplied
to the TV. With the
RECORD and PLAY (x2) buttons on the VCR or one
"RECORD"
button on the remote control pressed,
the TV will display
the
program
as it is being
recorded. The TV position (the "_"
indication is
off) is used for regular TV operation when the VCR
is not being used. This position also allows you to
record one channel while viewing another.
NOTES:
• When the power is turned on, the VCR/TV
selector
is
switched
to
the
VCR
mode
automatically.
• The VCR/TV
selector
is switched
to the VCR
mode when "PLAY (x2)" button is pressed.
MISS BUTTONS
MISS-Use to enter the VISS function mode.
MARK-To mark a VISS signal at the desired point on
tape during recording or playback.
ERASE-To erase a previously recorded VISS signal.
- 23 -
Advertisement
Table of Contents
