Table of Contents
Advertisement
CLOCK/COUNT/REMAIN
BUTTON
To switch
the display
between
the counter,
remaining tape time, and clock modes.
NOTE: To "CLOCK/COUNT/REMAIN"
button does
not work when the tape is not "inserted.
EJECT
@
®
Z'CF.J0_-_
®
@ @
®
@ @
®
@ @
TVNCR
®
®
©
_'U'_O"
"_KT
"rRACKING _.LOCK)
LQ___*
- ._..
,6 v
OO
O O
_88
MARK
EPd_E N)O/ER._SE
COUNTER "RESET" BUTTON
The readout
of the tape
counter
will return
to
"0:00:00" when this button is pressed.
,OSD (On Screen Display) FUNCTION BUTTONS
MENU BUTTON
Used to enter the On-Screen Programming mode.
CLEAR/MONITOR
BUTTON
CLEAR-Used
to go backward
and correct the
programmed information.
MONITOR-Press
MONITOR
button to view TV
program during playback. To return to normal play
viewing, press MONITOR button once again. Tape
continues in play mode during Monitoring.
DISPLAY BUTTON
Press to display the VCR operation mode, tape
counter, channel number, date and clock. Press this
button once again to remove the on-screen display.
Press this button twice to remove the clock display
(the display switches by pressing the "CLOCK/
COUNT/REMAIN" button when tape is inserted).
TRACKINGN.LOCK
BUTTONS
• "AUTO"
TRACKING:
When playback is started,
the auto tracking function
operates and adjusts
tracking automatically so the picture is optimized.
'NUTu n TRF, _' flashes in the VCR display for several
seconds and then changes to" PLRY" indication.
• MANUAL
"TRACKING"IV.LOCK
CONTROLS
(" •
"and "V ")
"TRACKING":
If noise appears on the screen
during playback, press "V
" or "•
" button until
the noise on the screen is reduced or eliminated.
"V.LOCK""
In case of vertical jitter in still mode
carefully adjust these controls for a stable picture.
NOTES:
• Tracking is automatically reset to normal when a
tape is inserted or the power cord is unplugged.
• Auto tracking may not operate correctly when the
tape is scratched or the recorded condition is
poor.
In this case, press the TRACKING
CONTROL
button (V or • ) to adjust tracking.
• If the AUTO TRACKING
button is pressed after
operating the tracking control button ( Vor •),
auto tracking operates again.
- 25 -
Advertisement
Table of Contents
