Connecting 12-Volt Trigger Outputs - Runco XtremeProjection X-450d Installation & Operation Manual

Installation
Connecting 12-volt Trigger Outputs to External Equipment: If your X-400d/X-450d
is equipped with an anamorphic lens, connect the +12V Trigger Input on the lens
transport to a 12-volt trigger output on the Dimension Digital Controller; see Figure 3-17.
Similarly connect other 12-volt trigger-activated equipment (such as retractable screens or
screen masks) to the other trigger outputs.
AutoScope Lens Motor
Power
AC Input
Switch
3.5-mm
mini plug
Retractable Screen or other
12-volt trigger-activated
device
Figure 3-17. Connecting 12-volt Trigger Outputs
Sleeve = Ground
Tip = +12V
38 Runco X-400d/X-450d Installation/Operation Manual
3D SYNC 3D SYNC TRIGGERS
1 2 3
Component / SCART Component / SCART
HD1 HD1
Y Y Video 1 Video 1 Video 2 Video 2
Video 3 Video 3
Pb Pb Pr Pr
HD2 HD2
USB USB RS-2 RS-2
To Access To Access
HDMI 1 HDMI 1 HDMI HDMI
HDMI 2 HDMI 2 HDMI HDMI