Screen - Runco XtremeProjection X-450d Installation & Operation Manual

Operation

Screen

Screen
Screen 1
Screen 2
Table 4-1. Aspect Ratio Settings (continued)
Remote
Aspect Ratio Control
Key
Virtual Cinema V-CINE
Native NATIVE
Auto Cinema --
The Screen Menu allows you to recall multiple sets of stored values for certain controls
(Output Shift, Image Alignment and Screen Masking) that are saved for each aspect ratio.
Such settings are also saved "per screen." To recall the Output Shift and Image Alignment
settings associated with "Screen 1" or "Screen 2," make that selection here.
16:9 Image on
16:9 Image on
2.35:1 Screen
2.35:1 Screen
16:9 Image on
2.35:1 Screen with
Virtual Cinema
1080i HDTV Image
720p HDTV Image
Select Auto Cinema to have the Dimension Digital Controller apply
the Cinema aspect ratio to 2.35:1 source material automatically,
when detected. To all other content, Auto Cinema applies the 16:9
aspect ratio.
66 Runco X-400d/X-450d Installation/Operation Manual
Description
A 16:9 image is scaled
NON-linearly (more on the sides
than in the center) to fit a 2.35:1
screen.
Select Native to display the
source signal in its native
resolution, centered in the
display area with no re-sizing or
overscan.
This means, for example, that
720p HDTV programs will
display with unused pixels on all
sides: 320 on the left and right
sides and 180 above and below.
With SDTV and EDTV sources,
the Dimension Digital Controller
scales the image horizontally to
achieve a 16:9 aspect ratio.