Installing The Autoscope Lens Motor (X-400D/X-450D/Cinewide With Autoscope); X-400D/X-450D/Cinewide With Autoscope Motor Assembly – Exploded View - Runco XtremeProjection X-450d Installation & Operation Manual

Figure 3-6 shows the X-400d/X-450d/CineWide with AutoScope motor assembly.
Screw, Phillips Pan-Head,
10-32 x 3/8" (12x)
AutoScope
1
Lens Motor
Figure 3-6. X-400d/X-450d/CineWide with AutoScope Motor Assembly –
Exploded View
Remove Projector Front Feet:
Place the projector upside down on a
blanket or other soft surface. Use a
Phillips screwdriver to loosen the
screws attaching the two front feet to
the projector. Then, remove the feet.
Runco X-400d/X-450d Installation/Operation Manual
2
CineWide with AutoScope
3
Ceiling Mount Adapter/
Projector Stand, Right
4 CineWide with
AutoScope Ceiling
Mount Adapter/
Projector Stand, Left
27
Installation
Installing the AutoScope
Lens Motor
(X-400d/X-450d/CineWide
with AutoScope)