Connecting 12-Volt Trigger Outputs To External Equipment; Connecting 12-Volt Trigger Outputs - Runco Video Xtreme VX-44d Installation & Operation Manual
1080p digital light processing projector and digital high definition (dhd) controller/scaler/processor
Hide thumbs
Also See for Video Xtreme VX-44d:
- Owner's operating manual (114 pages) ,
- Owner's operating manual (114 pages) ,
- Brochure & specs (6 pages)
Table of Contents
Advertisement
If your VX-44d/-55d is equipped with a CineWide with AutoScope system, connect the
AutoScope lens motor to a 12-volt trigger output on the DHD Controller; see Figure 3-16.
Similarly connect other 12-volt trigger-activated equipment (such as retractable screens or
screen masks) to the other trigger outputs.
AutoScope Lens Motor
Power
AC Input
Switch
3.5-mm
mini plug
Retractable Screen or other
12-volt trigger-activated
device
Figure 3-16. Connecting 12-volt Trigger Outputs
Runco VX-44d/-55d Installation/Operation Manual
Sleeve = Ground
Tip = +12V
37
Installation
Connecting 12-volt
Trigger Outputs to
External Equipment
Advertisement
Table of Contents
Troubleshooting
