Connecting 12-Volt Trigger Outputs - Runco LightStyle LS-12HBd Installation & Operation Manual

Installation
Connecting 12-volt Trigger Outputs to External Equipment: If your LS-12HBd is
equipped with an anamorphic lens, connect the +12V Trigger Input on the lens transport
to a 12-volt trigger output on the Dimension Digital Controller; see Figure 3-12.
Similarly connect other 12-volt trigger-activated equipment (such as retractable screens or
screen masks) to the other trigger outputs.
Anamorphic Lens Transport
(Rear View)
+12V Trigger Input
3.5-mm
mini plug
Retractable Screen or other
12-volt trigger-activated
device
Figure 3-12. Connecting 12-volt Trigger Outputs
Sleeve = Ground
Tip = +12V
40 LightStyle™ LS-12HBd Installation/Operation Manual
TRIGGERS
D SYNC D SYNC USB USB
1 2 3
Component / SCART Component / SCART
HDMI 1 HDMI 1
HD1 HD1
Y Y Video 1 Video 1 Video 2 Video 2
Video 3 Video 3
Pb Pb Pr Pr
HDMI 2 HDMI 2
HD2 HD2
RS-232 RS-232
To Accesso To Accesso
HDMI 3 HDMI 3
HDMI 4 HDMI 4