Dhcp Client - Rosewill RNX-G40 User Manual

Wireless Router RNX-G40
Item
Static IP
IP Address
Subnet Mask
Default Gateway
DNS 1
DNS 2
DNS 3
Clone MAC Address
Enable uPNP
Enable Web Server
Access on WAN
Apply Changes
Reset
II

DHCP Client

Screen snapshot - WAN Interface Setup - DHCP Client
Description
Click to select Static IP support on WAN interface. There are IP address, subnet
mask and default gateway settings need to be done.
If you select the Static IP support on WAN interface, fill in the IP address for it.
If you select the Static IP support on WAN interface, fill in the subnet mask for it.
If you select the Static IP support on WAN interface, fill in the default gateway for
WAN interface out going data packets.
Fill in the IP address of Domain Name Server 1.
Fill in the IP address of Domain Name Server 2.
Fill in the IP address of Domain Name Server 3.
Fill in the MAC address that is the MAC address to be cloned. Refer to 4.24 What is
Clone MAC Address?
Click the checkbox to enable uPNP function. Refer to 4.22 What is Universal Plus
and Plav (uPNP)?
Click the checkbox to enable web configuration from WAN side.
Click the Apply Changes button to complete the new configuration setting.
Click the Reset button to abort change and recover the previous configuration
setting.
- 31 -
User Manual