Pptp - Rosewill RNX-G40 User Manual

Wireless Router RNX-G40
IV

PPTP

Item
PPTP
IP Address
Subnet Mask
Server IP Address
User Name
Password
MTU Size
Attain DNS
Automatically
Set DNS Manually
DNS 1
DNS 2
DNS 3
Clone MAC Address
Enable uPNP
Screen snapshot - WAN Interface Setup – PPTP
Description
Allow user to make a tunnel with remote site directly to secure the data
transmission among the connection. User can use embedded PPTP client
supported by this router to make a VPN connection.
If you select the PPTP support on WAN interface, fill in the IP address for it.
If you select the PPTP support on WAN interface, fill in the subnet mask for it.
Enter the IP address of the PPTP Server.
If you select the PPTP support on WAN interface, fill in the user name and
password to login the PPTP server.
f you select the PPTP support on WAN interface, fill in the user name and
password to login the PPTP server.
Fill in the mtu size of MTU Size. The default value is 1400. Refer to 4.23 What is
Maximum Transmission Unit (MTU) Size?
Click to select getting DNS address for PPTP support.
Click to select getting DNS address for PPTP support.
Fill in the IP address of Domain Name Server 1.
Fill in the IP address of Domain Name Server 2.
Fill in the IP address of Domain Name Server 3.
Fill in the MAC address that is the MAC address to be cloned. Refer to 4.24 What is
Clone MAC Address?
Click the checkbox to enable uPNP function. Refer to 4.22 What is Universal Plus
and Plav (uPNP)?
- 34 -
User Manual