Rosewill RNX-N4PS Troubleshooting Manual
  1. Manuals
  2. Brands
  3. Rosewill Manuals
  4. Wireless Router
  5. RNX-N4PS
  6. Troubleshooting manual
Rosewill RNX-N4PS Troubleshooting Manual

Rosewill RNX-N4PS Troubleshooting Manual

Wireless router
Hide thumbs Also See for RNX-N4PS:
1
2
3
4
5
6

Advertisement

Table of Contents

See also: User Manual
Wireless Router RNX-N4PS
Trouble Shooting

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RNX-N4PS and is the answer not in the manual?

Questions and answers

Related Manuals for Rosewill RNX-N4PS

Summary of Contents for Rosewill RNX-N4PS

  • Page 1 Wireless Router RNX-N4PS Trouble Shooting...
  • Page 2 1) Link the Cable between your computer and RNX-N4PS’s LAN port. 2) Open your web browser and type the IP address of the RNX-N4PS which you want to use as the repeater. The default IP address is 192.168.0.1. At the login, enter your username and password (default username: admin, password: admin).
  • Page 3 You will see the count down of the system rebooting 5) The router will restart and set as a repeater now. 6) As repeater, RNX-N4PS’s DHCP function will be disabled. So you will need to manually set your computer’s IP in order to login to the management page.
  • Page 4 Wireless Router Trouble Shooting Highlight Internet Protocol (TCP/IP) and click Properties. Click Use the following IP address and enter an IP address that is on the same subnet as the LAN IP address on your router. Example: If the router’s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 100 and 200.
  • Page 5 Wireless Router Trouble Shooting 10) After click ‘‘Site Survey’’, you will see a popup window like below. Click Refresh to find your Wireless Router’s SSID. Click ‘‘Select’’ to add your desired network. 11) Upon adding, you will see the below page. Please type in your Wireless Router’s Connecting Encryption method and Password.
  • Page 6 Trouble Shooting 12) You should see the system is counting down. When finish, you should see this shows up. Click ‘‘Close’’ 14) Your RNX-N4PS is now ready to act as a repeater to help you extend your wireless broadcast range!!

Table of Contents