Dhcp; Dhcp Settings - Rosewill RNX-AC750RT User Manual

AC750 Wireless Dual Band Gigabit Router
storage sharing servers.

Guest Network Isolation -. If enabled, guests are isolated from each other.

Guest Network Bandwidth Control - If enabled, the Guest Network Bandwidth Control rules
will take effect.
 Band Select/Guest Network – Select the wireless network band (2.4G/5G) and enabled or
disable its Guest Network function.

Network Name - Enter a value of up to 32 characters. The same Name (SSID) must be
assigned to all wireless devices in your Guest Network.
 Max Guest number – The maximum of guests at the same time,

Security - You can configure the security of Guest Network here.

Access Time - During this time the wireless stations could accessing the AP.

Note:
The range of bandwidth for Guest Network is calculated according to the setting of Bandwidth
Control on the page "Bandwidth Control->Control Settings".
4.9

DHCP

Figure 4-43 The DHCP menu
There are three submenus under the DHCP menu (shown in Figure 4-43): DHCP Settings,
DHCP Clients List and Address Reservation. Click any of them, and you will be able to
configure the corresponding functions.
4.9.1

DHCP Settings

Choose menu "DHCP → DHCP Settings", you can configure the DHCP Server on the page as
shown in Figure 4-44.The router is set up by default as a DHCP (Dynamic Host Configuration
Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are connected to
the router on the LAN.
RNX-AC750RT
- 65 -
User Manual