5Wireless -Advanced Settings - Rosewill RNX-G40 User Manual

Wireless Router RNX-G40
Item
Disable Wireless LAN
Interface
Band
Mode
Site Survey
SSID
Channel Number
Associated Clients
Enable Mac Clone
(Single Ethernet Client)
Apply Changes
Reset
3.3.5 Wireless - Advanced Settings
These settings are only for more technically advanced users who have a sufficient knowledge about wireless
LAN. These settings should not be changed unless you know what effect the changes will have on your
WLAN AP Router.
Description
Click on to disable the wireless LAN data transmission.
Click to select 2.4GHz(B) / 2.4GHz(G) / 2.4GHz(B+G)
Click to select the WLAN AP / Client / WDS / AP+WDS
wireless mode.
The Site Survey button provides tool to scan the wireless
network. If any Access Point or IBSS is found, you could
choose to connect it manually when client mode is
enabled. Refer to 3.3.9 Site Survey.
It is the wireless network name. The SSID can be 32
bytes long.
Select the wireless communication channel from
pull-down menu
Click the Show Active Clients button to open Active
Wireless Client Table that shows the MAC address,
transmit-packet, receive-packet and transmission-rate for
each associated wireless client.
Take Laptop NIC MAC address as wireless client MAC address. [Client Mode
only]
Click the Apply Changes button to complete the new
configuration setting.
Click the Reset button to abort change and recover the
previous configuration setting.
- 20 -
User Manual