Wireless Router
RNX-EasyN4
Authentication Mode: It shows the active authentication mode for the wireless
Passphrase Key: It shows the passphrase key that is randomly generated by the
Interface: If device is set to repeater mode, you can choose "Client" interface to
connect with other AP by using WPS, otherwise you may choose "AP"
interface to do WPS with other clients.
WPS via Push Button: Press the button to start the WPS process. The router will
WPS via PIN: You can fill-in the PIN code of the wireless device and press the
button to start the WPS process. The router will wait for the WPS
request from the wireless device within 2 minutes.
- Client List
This WLAN Client Table shows the Wireless client associate to this Wireless
Router.
connection.
wireless router during the WPS process. You may need this
information when using a device which doesn't support WPS.
wait for the WPS request from the wireless devices within 2
minutes.
User Manual