4Wireless - Basic Settings - Rosewill RNX-G40 User Manual

Wireless Router RNX-G40
Item
Gateway
Bridge
Wireless ISP
Apply Changes
Reset
3.3.4 Wireless - Basic Settings
This page is used to configure the parameters for wireless LAN clients that may connect to your AP Router.
Here you may change wireless encryption settings as well as wireless network parameters.
Description
Traditional gateway configuration. It always connects internet via ADSL/Cable
Modem. LAN interface, WAN interface, Wireless interface, NAT and Firewall
modules are applied to this mode
Each interface (LAN, WAN and Wireless) regards as bridge. NAT, Firewall and
all router's functions are not supported
Switch Wireless interface to WAN port and all Ethernet ports in bridge mode.
Wireless interface can do all router's functions
Click the Apply Changes button to complete the new configuration setting.
Click the Reset button to abort change and recover the previous configuration
setting.
Screen snapshot. — Wireless Basic Settings
- 19 -
User Manual