26Management - Qos Setup - Rosewill RNX-G40 User Manual

Wireless Router RNX-G40
3.3.26 Qos(Quality of Service)
The QoS can let you classify Internet application traffic by source/destination IP address and port number.
You can assign priority for each type of application and reserve bandwidth for it. The packets of applications
with higher priority will always go first. Lower priority applications will get bandwidth after higher priority
applications get enough bandwidth. This can let you have a better experience in using critical real time
services like Internet phone, video conference etc. You can adjust the priority of the rules by moving them up
or down.
Note: If the total assigned bandwidth of higher priority applications is larger than the maximum bandwidth
provided by the WAN port, the other applications will not get any bandwidth.
Screen snapshot - Management - Quality of Service
Item
Enable/Disable QoS
ISP Bandwidth
Undefined IP Bandwidth
Adjust QoS rule priority
Description
You can check YEnable QoSE to enable QoS function for the WAN port. You
also can uncheck "Enable QoS" to disable QoS function for the WAN port.
The two fields must fill in ISP's upload and download bandwidth.
For general IP address, the specified upload and download bandwidth fill in
here. If you have any IP address need to specified in special QoS rules, please
fill it in following.
You can select the priority field and drop down it to select. There are three
types of priority level, "High", "Medium" and "Low".
- 48 -
User Manual