8Wds Settings - Rosewill RNX-G40 User Manual

Wireless Router RNX-G40
Reset
Current Access Control List
Delete Selected
Delete All
Reset
3.3.8 WDS Settings
Wireless Distribution System uses wireless media to communicate with other APs, like the Ethernet does. To
do this, you must set these APs in the same channel and set MAC address of other AP that you want to
communicate with in the table and then enable the WDS.
Click the Reset button to abort change and recover the previous
configuration setting.
It shows the registered clients that are allowed to link to this WLAN AP
Router.
Click to delete the selected clients that will be access right removed from
this WLAN AP Router.
Click to delete all the registered clients from the access allowed list.
Click the Reset button to abort change and recover the previous
configuration setting.
Screen snapshot - WDS Setup
- 26 -
User Manual