Table of Contents
Advertisement
Wireless Router
RNX-N4
WAN DHCP
1. Select the DHCP Connection (Dynamic IP Address) radio button and then click on the
Next button.
2. You have the option of cloning your PCs MAC address onto the device. Click on the Clone
Your PCs MAC Address to automatically copy the MAC address. You may also specify a host
name. Click on the Next button to continue.
3. The WAN configuration is complete. Click on the Connect button to connect to the Internet.
PPPoE
1. Select the PPPoE radio button and then click on the Next button.
2. Address Mode: PPPoE can be used with a dynamic or static IP address. If you select the
Dynamic IP radio button, then the IIP address in the next field is not required. However, if you
select the Static IP radio button, then the IP address in the next field is required.
3. User Name: Specify the user name which is provided by your ISP.
4. Password: Specify the password which is provided by your ISP, and then verify it once again
in the next field.
5. Service Name: Specify the name of the ISP.
6. Click on the Next button to continue.
7. The WAN configuration is complete. Click on the Connect button to connect to the Internet.
7
Quick Installation Guide
Advertisement
Table of Contents
