15Firewall - Port Forwarding - Rosewill RNX-G40 User Manual

Wireless Router RNX-G40
3.3.15 Firewall - Port Forwarding
Entries in this table allow you to automatically redirect common network services to a specific machine
behind the NAT firewall. These settings are only necessary if you wish to host some sort of server like a web
server or mail server on the private local network behind your Gateway's NAT firewall.
Item
Enable Port Forwarding
Local IP Address
Protocol
Comments
Apply Changes
Reset
Delete Selected
Delete All
Reset
Screen snapshot - Firewall - Port Forwarding
Description
Click to enable the Port Forwarding security function.
To forward data packets coming from WAN to a specific IP address that
hosted in local network behind the NAT
protocol, port range and your comments.
The Protocol can be TCP, UDP or Both.
The Port Range for data transmission.
Comments let you know about whys to allow data packets forward to the IP
address and port number.
Click the Apply Changes button to register the ports to port filtering list.
Click the Reset button to abort change and recover the previous configuration
setting.
Click to delete the selected port range that will be removed from the
port-filtering list.
Click to delete all the registered entries from the port-filtering list.
Click the Reset button to abort change and recover the previous configuration
setting.
- 38 -
firewall, fill in the IP address,
User Manual