Lan Interface Setup - Rosewill RNX-G40 User Manual

Wireless Router RNX-G40
Item
SSID
BSSID
Channel
Type
Encrypt
Signal
Select
Refresh
Connect

3.3.10 LAN Interface Setup

This page is used to configure the parameters for local area network that connects to the LAN ports of your
WLAN AP Router. Here you may change the setting for IP address, subnet mask, DHCP, etc.
Description
It shows the SSID of AP.
It shows BSSID of AP.
It show the current channel of AP occupied.
It show which type AP acts.
It shows the encryption status.
It shows the power level of current AP.
Click to select AP or client you'd like to connect.
Click the Refresh button to re-scan site survey on the screen
Click the Connect button to establish connection.
Screen snapshot - LAN Interface Setup
- 29 -
User Manual