Calling A Specific Station In The Same Zone (Zone Call) - Icom IC-80AD Instruction Manual

Vhf/uhf digital transceiver
Hide thumbs Also See for IC-80AD:
Table of Contents

Advertisement

D Calling a specific station in the same zone (Zone call)
q Set the desired repeater's frequency, offset and shift direc-
tion (pgs. 23, 31), then select the DV mode (p. 25).
Your own call sign (step w) and station call sign (step e)
can also be set as same as repeater call signs in current
call sign mode (step r).
w Set the current call sign to your own call sign.
• See pgs. 47, 48 for current call sign setting details.
e Set the current station call sign as follows:
z Push and hold [UR](.) for 1 sec. to enter UR call sign
selection mode.
x Rotate [DIAL] to select the desired station call sign.
• Push [BAND] several times to select "GRP UR" in advance.
c Push [UR](.) again to return to frequency indication.
r Set the current repeater's call sign as follows:
z Push and hold [CS](9) for 1 sec. to enter the current call
sign mode.
• UR call sign is displayed.
• Push and hold [CS](9) for 1 sec. to toggle the call sign and
repeater name indications.
x Push [ ](2) or [ ](8) to select "R1," access repeater's
call sign, then push [ ](5) to enter the current call sign
selection mode.
c Push [ ](2) or [ ](8) to select the desired access re-
peater's call sign, then push [ ](5) to set the call sign
for "RPT1."
• Return to the current call sign mode.
Pushing [BAND] selects the repeater group when selection.
DV MODE OPERATION
v Push [ ](2) or [ ](8) to select "R2," link repeater's call sign,
then push [ ](5) to set the current call sign selection mode.
• "RPT2" call sign screen is displayed.
b Push [ ](2) or [ ](8) to select the desired repeater call
sign in the same zone, then push [ ](5).
• Return to the current call sign mode.
n Push [V/MHz] to return to frequency indication.
t Push [PTT] to transmit; release to receive.
• UR call sign is displayed and scrolled in sequence on the fre-
quency display depending on "TX CS" setting (p. 135).
• Current call sign setting example
q
w
Area
Repeater q JP3YHL
My call sign
Repeater r JP3YHJ
JA3YUA
UR
R1
7
e
r
Zone
Station call sign
JG3YMK
MY
R2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
65

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IC-80AD and is the answer not in the manual?

Questions and answers

Table of Contents