Icom IC-80AD Instruction Manual page 14

2
PANEL DESCRIPTION
5 • SKIP KEY [5] • [SKIP](5)
Numeral input and DTMF code: '5'
Push and hold to turn the frequency skip function
ON and OFF in VFO mode, or set the memory
channel as the following skip channel in memory
mode in order. (pgs. 102, 108, 109)
• "SKIP" appears when memory skip, "PSKIP" appears
when frequency skip and no indication appears when
non skip channel is set.
• While pushing and holding this key, [DIAL] rotation se-
lects the skip condition.
During menu screen operation, push to enter or
exit to/from the selected set items, etc. (p. 115)
6 • MEMORY NAME KEY [6] • [M.N](6)
Numeral input and DTMF code: '6'
Push and hold for 1 sec. to turn the memory or
bank name indication ON and OFF. (p. 98)
• While pushing and holding this key, [DIAL] rotation se-
lects the memory or bank indication.
During menu screen operation, push to select the
lower layer. (p. 115)
7 • TONE/DIGITAL SQUELCH KEY
[7] • [TONE](7)/[DSQ](7)
Numeral input and DTMF code: '7'
During FM/FM-N mode operation, push and hold
for 1 sec. to select repeater tone, tone squelch,
tone squelch reverse, DTCS squelch, DTCS
squelch reverse and no tone operation in se-
quence. (p. 150)
6
• Pocket beep function is available for tone squelch and
DTCS squelch. (p. 151)
During DV mode operation, push and hold for 1
sec. to select digital call sign squelch, digital code
squelch and no squelch operation in sequence.
(p. 151)
• Pocket beep function is available. (p. 151)
8 • RX CALL SIGN SET KEY [8] • [RX CS](8)
Numeral input and DTMF code: '8'
During DV mode operation, push and hold for
1 sec. to set the received call signs (station and
repeaters) to current call sign. (p. 50)
During menu screen operation or select memory
write mode, push to select the set items or values.
(p. 115)
9 • TONE SCAN/CALL SIGN KEY
[9] • [T.SCAN](9)/[CS](9)
Numeral input and DTMF code: '9'
During FM/FM-N mode operation, push and hold
for 1 sec. to start tone scan function. (p. 152)
During DV mode operation (including DR mode
operation), push and hold for 1 sec. to enter the
current call sign mode. (pgs. 48, 59)