Scan Operation; Scan Types - Icom IC-80AD Instruction Manual

10

SCAN OPERATION

Scan types

Scanning searches for signals automatically and makes
it easier to locate new stations for contact or listening pur-
poses.
FULL SCAN
(p. 104)
495
kHz
Scan
Jump
PROGRAMMED SCAN
(p. 104)
Band Scan edges
edge
xxA xxB
Scan
Jump
PROGRAMMED LINK SCAN
Repeatedly programmed scans user-programmed frequen-
cies selected at P-LINK items in the menu mode.
102
Repeatedly scans all frequen-
cies over the entire band.
999.990
Some frequency ranges are
MHz
not scanned according to the
frequency coverage of the
transceiver's version.
Repeatedly scans between
two user-programmed fre-
quencies. Used for checking
Band
edge
for frequencies within a speci-
fied range such as repeater
output frequencies, etc.
(pgs. 104, 123)
SELECTED BAND SCAN
(p. 104)
Band Band
edge edge
Scan
Jump
FREQUENCY/MEMORY
SKIP FUNCTION
(p. 108)
Band Band
edge edge
Scan
SKIP SKIP
Jump
The frequency skip scan function can be turned ON or OFF
in VFO mode. When this function is set to ON, the specified
frequencies are skipped during VFO scan.
• "PSKIP" indicator appears in VFO mode.
Repeatedly scans all frequen-
cies over the entire selected
band.
Skips unwanted frequencies
or channels that inconve-
niently stop scanning. This
setting can be turned ON or
OFF by pushing and holding
[SKIP](5) in memory mode.