Icom IC-80AD Instruction Manual page 131

D Program scan link function (P-LINK)
Sets the program scan link function. The link function pro-
vides continuous program scan in the selected program scan
number during program scan.
Default settings for P-LINK
P0
PROG 24 are linked and PROG 0 is no-linked.
• Confirming program scan link
q Push [
](2) or [ ](8) to select the program scan link
number that you want to confirm.
w Push [ ](5) to enter the program scan link setting.
e Push [ ](2) or [ ](8) several times to select "LINK."
r Push [ ](5), then push [ ](2) or [ ](8) to confirm the
linked program scans. Push [ ](5) to exit.
to P-LINK are PROG 1 to
P9
MENU SCREEN OPERATION
• Program scan link setting
q Push [
](2) or [ ](8) to select the program scan link
number that you want to change.
w Push [ ](5) to enter the program scan link setting.
e Push [ ](2) or [ ](8) several times to select the setting
"ADD" or "CLEAR."
• When "ADD" is selected, only non-linked program scans are
displayed. When "CLEAR" is selected, only linked program
scans are displayed.
r Push [ ](5), then push [
desired program scan.
t Push [ ](5) to set the program scan link setting.
y Repeat steps r and t to add or clear the program
scan to/from the link, or push [MENU
screen operation.
12
](2) or [ ](8) to select the
] to exit MENU
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
123