EGRO 5511 Manual
TS WAND TEMPERATURE ADJUSTMENT
TS Wand Adjustment
¯
TS wand
¯
(1) Adjustment board for Final Temperature.
¯
(2) Close up of Adjustment board.
¯
Range is 140°-170°
¯
To adjust the final temp.
¯
Remove left side panel
¯
Open Motherboard panel door
¯
Using a small Philips screw driver, adjust the inset screw on the riser board.
¯
Counter-Clockwise to increase.
¯
Clockwise to decrease.
¯
Make small adjustments
¯
TS board does limit the range of turning with a plate
2
1
Page 62