Error Messages - Rancilio EGRO 5511 Technical Manual

EGRO 5511 Manual
PROGRAMMING - ERROR MESSAGES
No.
1 Error in NVRAM
31 Coffee boiler could not be refilled
33 Steam boiler could not be refilled
41 Coffee boiler does not heat up
43 Steam boiler does not heat up
61 No signal from Flowmeter P1
Applicable as from Software Version 1.20
E061 18200
Error-Number
Description
• Switch machine on and off
• Main water supply faucet/ Pump
• Brew valve Y1 does not close
• Flowmeter P1
• Expansion / Non-return valve
• Boiler inlet
• Control system
• Water Supply/Pump pressure too high
• Main water supply faucet/ Pump
• Level sensor B3
• Y3, mechanical or electrical
• Non return valve
• Cable connections B3 to Control J9
• Control system
• Temperature fuse F11
• Semiconductor element K1
• Heater / Connection / X2
• Temperature sensor NTC B1 /
• Connection J11 pin 1/2
• Control system
• Temperature fuse F21
• Semiconductor element K2
• Heater / Connection / X2
• Pressure switch S13
• Control system
• Wall socket connection 1 phase is
• Flowmeter P1
• Expansion or Non-return valve
• Coffee boiler, inlet or outlet
• Piston jammed
• Flow limiter blocked
• Brew valve (Y1)
Number of brew cycles
Source
Pin 4/5
missing
Display OFF
Yes --
Yes Coffee
Yes Steam
Yes Coffee
Yes Steam
Yes Coffee
Page 36