Function Flowm Test; Function Ext.board Test - Rancilio EGRO 5511 Technical Manual

EGRO 5511 Manual

5.7 Function FLOWM TEST

Function: Check the Flowmeter
↓
Start/Stop:
Display: Continuous display of FM signal.
100 FM-Imp. = ca. 1/2 dl.

5.8 Function EXT.BOARD TEST

5.8.1 24V OUTPUTS.
Function: Check the 8 (24VDC) outputs on
the extension card
Selection: +/-
Start/Stop: ↓
Status: 1 = Component activated
0 = Component not activated
Display Component
MP 1 0 Milk pump M4 (left milk outlet / foam)
MP 2 0 Milk pump M5 (right milk outlet / milk)
CWV 0 Cold water valve for automatic milk rinse
SV 0 Steam valve for automatic milk rinse
ABV 0 Air bleed valve for automatic milk rinse
AFV 0 Air foaming head valve
RES(2,3) 0 Spares
5.8.2 SIGNAL INPUTS..
24V OUTPUTS..( press + button)
Function: Check the 8 (24VDC) inputs on
the extension card (Print ok)
Status: 1 = signal active
0 = signal not active
Flowmeter P1 (coffee)
0 0 99
Component
MP1 0
Jack on ex-
tension card
Statusanzeige
0 0 0 0 1 1 0 0
Bohnensensor
Status
LED
(red)
J46 / 1-2 3
J46 / 3-4 4
J45 / 12-11 10
J45 / 10-9 9
J45 / 8-7 8
J45 / 5-6 7
J45 / 4-1 6, 5
Milchsensor
Page 34