Host Configuration (Command Line Option -Z); Adapter Parameters - Qlogic 2400 Series User Manual

5–Fibre Channel Noninteractive Commands

Host Configuration (Command Line Option -z)


List of adapters: adapter model, port number, WWPN, serial number (SN),
adapter number (adapter 0–n), and status (online/offline)

Total number of QLogic Fibre Channel adapters detected
NOTE:
The failover and SAN device management APIs are QLogic-specific libraries
required for QConvergeConsole CLI. The versions of these libraries are
useful for debugging purposes.
Host Configuration
(Command Line Option -z)
The command line option -z provides a summary for the selected adapter in a
single command. The command format is:
# qaucli -pr fc -z
QConvergeConsole CLI shows the information in
Line Option -g)" on page

Adapter general information

Adapter vital product data (VPD)

Adapter parameter settings

Driver settings information:



Device/LUN Information

Selective LUNs Information

To show the information for a single adapter, issue the following command:
# qaucli -pr fc -z (<hba instance> | <hba wwpn>)
Where:
hba instance = Adapter number (use -g command to find)
To show the information for all adapters, issue the following command:
# qaucli -pr fc -z all
5-2
5-1, as well as the following additional information:
Group: persistent
Group: binding
Boot device settings
hba wwpn = World wide port name of the adapter
"Host Information (Command
SN0054667-00 B