(Show Hba Statistics); (Help); Adapter Statistics Parameters - Qlogic 2400 Series User Manual

5–Fibre Channel Noninteractive Commands
-gs (Show HBA Statistics)
-gs

(Show HBA Statistics)

To view the adapter statistics, issue the following command:
# qaucli -pr fc -gs
<param alias>) <param value>]
Where:
Table 5-5
Sets how often statistics are retrieved
Set the polling interval when retrieving statis-
tics (seconds)
Saves the adapter's statistics to a CVS log file
a
When the AutoPoll value is 0, statistics are retrieved automatically until the user aborts the
operation.
When the AutoPoll value is in the range of 1–256, statistics are retrieved for the number of cycles
specified by this value.
Under Linux, this feature is disabled if you are using the IOCTL or sysfs (inbox)
driver.
-h

(Help)

To view the help file, issue the following command:
# qaucli -pr fc (-h)
To view help information for an individual command, issue the following command:
# qaucli -pr fc <Command Line Parameter> (-h)
For example, typing qaucli -pr fc -l -h shows:
5-14
(
<hba instance> | <hba wwpn>) [(<param name> |
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name of the adapter
param name = Name of the parameter
param alias = Alias of the parameter
param value = New value of the parameter
lists the adapter statistics parameter names, aliases, and values.
Table 5-5. Adapter Statistics Parameters
Description
(see table 4-7)
(see table 4-7)
(see table 4-7)
Name Alias
AutoPoll AP
PollRate SR
LogToFile LF
SN0054667-00 B
Value
a
0–256
5–30
Log file
name