(Display Lun Info); (Display Link Status) - Qlogic 2400 Series User Manual

-l

(Display LUN Info)

This command shows LUN information for:

All adapters

A specific target

A specific LUN on a specific target
To show the LUN information for all target devices for a specific adapter Instance,
issue the following command:
# qaucli -pr fc -l (<hba instance> | <hba wwpn>)
To show the LUN information for a specific device for a specific adapter port, issue
the following command:
# qaucli -pr fc -l (<hba instance> | <hba wwpn>) (<target port
id> | <target wwpn>)
To show the LUN information for a specific LUN on a specific target device for a
specific adapter port instance, issue the following command:
# qaucli -pr fc -l (<hba instance> | <hba wwpn>) (<target port
id> | <target wwpn>) <lun id>
Where:
hba instance = Adapter number (use -g command to find)
target port id = Port ID of the target
-ls

(Display Link Status)

To view the link status, issue the following command:
# qaucli -pr fc -ls
name> | <param alias>) <param value>]
Where:
SN0054667-00 B
hba wwpn = World wide port name of the adapter
target wwpn = World wide port name of the target
lun id = ID of the LUN
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name of the adapter
param name = Name of the parameter (see
param alias = Alias of the parameter (see
param value = New value of the parameter (see
5–Fibre Channel Noninteractive Commands
(
<hba instance> | <hba wwpn>) [(<param
Table
Table
-l (Display LUN Info)
5-8)
5-8)
Table 5-8)
5-23