(Restore Vlan & Teaming Configuration) - Qlogic 2400 Series User Manual

pDNSServers[
pDNSServers[
pDNSServers[
............................
VLAN ID
............................
IPv4Address
IPv4SubnetMask
IPv4GatewayAddr
DHCPServerCount
IPv6GatewayAddr
IPv6AddressCount
DNSServerCount
-vtrestore
(Restore VLAN & Teaming Configuration)
To reinstate previously saved VLAN and team settings from a file, issue the
-vtrestore command as follows:
> qaucli -pr nic -vtrestore [file_name]
The default file configuration file name for VLAN and teaming is
vtstate-user.cfg, which is saved in the QConvergeConsole CLI installation
directory. You may have saved your configuration with a different file name or
location.
NOTE:
The -vtrestore command can restore a configuration file produced only
by the -vtsave command. Similarly, a configuration that is saved using the
QLogic Windows Teaming Property pages can be restored only with the
Windows Teaming Property Pages.
For example:
>qaucli -pr nic -vtrestore c:/system_1.cfg
Using config file: E:\Program Files\QLogic Corporation
\QConvergeConsoleCLI\netscli.cfg
Loading CNA Data ...
Loading: 1. CNA ...
Loading: 1. CNA Port index : 1 ...
Loading: 1. CNA Port index : 2 ...
Loading: 2. CNA ...
Loading: 2. CNA Port index : 1 ...
Loading: 2. CNA Port index : 2 ...
Refreshing interfaces ... Please wait ...
Attempting to restore TEAMs and VLANs if configured prior to vtdriver updaate.
*** Teams:
*** Ports:
SN0054667-00 B
-vtrestore (Restore VLAN & Teaming Configuration)
0] : fec0:0:0:ffff::1
1] : fec0:0:0:ffff::2
2] : fec0:0:0:ffff::3
: 555
:
:
:
: 0
:
: 0
: 0
4–NIC Noninteractive Commands
4-25