Command Format; Table - Qlogic 2400 Series User Manual

Host Configuration
Use these options to show the information for one or all of the adapter ports in the
system. The -z option shows the combination of the commands listed in

Table

5-1. The commands are listed in alphabetical order.
CLI
-c
-e
-fg
-g
-i
-l
-m
-p
-t

Command Format

The command format for noninteractive mode is:
# qaucli -pr fc -(Cmd) (<hba instance> | <hba wwpn>)
(view | info)
Where:
SN0054667-00 B
Table 5-1. Options Shown by -z
Description
adapter
Show settings
Configure boot device
View driver settings
Show system information
adapter
Show information
Show LUN list
Configure selective LUNs
Configure target persistent binding
Show target list
hba instance = Adapter port instance (use -g command to find)
hba wwpn = Adapter world wide port name
5–Fibre Channel Noninteractive Commands
.
See User Guide Section
"-c (Show Parameter Settings)" on
page 5-7
"-e (Boot Device View | Select | Dis-
able)" on page 5-9
"-fg (Show Driver Settings)" on
page 5-12
"-gs (Show HBA Statistics)" on
page 5-14
"-i (Display HBA General Information or
VPD Information for One or All HBAs)"
on page 5-16
"-l (Display LUN Info)" on page 5-23
"-m (View, Enable, or Disable LUNs)" on
page 5-24
"-p (Display Persistent Target Binding
Info)" on page 5-28
"-t (Display Target Information)" on
page 5-34
Host Configuration
5-3