Gm-4Ti Module; Gm-4Ti Module; Gm-4Xi Module; Gm-4Xi Module - Extreme Networks Alpine 3804 Hardware Manual

Extreme alpine 3804: hardware guide
Hide thumbs Also See for Alpine 3804:
Table of Contents

Advertisement

GM-4Ti Module

Figure 74 shows the GM-4Ti module.
Figure 74: GM-4Ti module
Module status
LED
Port status LEDs
The GM-4Ti module has four Gigabit Ethernet ports. All Gigabit Ethernet ports on this module use
standard RJ-45 connectors and autonegotiate for 100BASE-TX or 1000BASE-T.
The default configuration of the GM-4Ti module is as follows. All ports:
• Are added to the default VLAN as untagged.
• Inherit the properties of the default VLAN (protocol type, VLANid, and so forth).
• Operate in autonegotiation mode.
LEDs
The GM-4Ti module has the following LEDs:
• Module status
• Port status
• Port speed
For information about the LEDs and their activity on the GM-4Ti module, see "I/O Module LEDs" on
page 176.

GM-4Xi Module

Figure 75 shows the GM-4Xi module.
Figure 75: GM-4Xi module
Module status
LED
Port status LEDs
The GM-4Xi module has four GBIC-based Gigabit Ethernet ports. All Gigabit Ethernet ports on this
module use standard GBIC connectors and support 1000BASE-SX, 1000BASE-LX, and 1000BASE-LX70.
The default configuration of the GM-4Xi module is as follows. All ports:
Extreme Networks Consolidated Hardware Guide
Port speed LEDs
1
1
100/1000 Mbps ports
2
3
Gigabit Ethernet ports
2
3
Configuring I/O Modules
4
38_GM4T
4
38_GM4X
163

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents