Database; Creating A Backup File; Changing The Backup Timeouts - Extreme Networks Sentriant AG Software User's Manual

Table 14: CIDR Naming Conventions (continued)
Block Netmask
/14 255.252.0.0
/13 255.248.0.0

Database

Creating a Backup File

To create a backup file of system configuration and data:
See "Initiating a New Backup" on page

Changing the Backup Timeouts

If the backup process takes longer than the default timeouts (10 minutes for pg_dump and 1 minute for
tar), you can increase the timeout values by performing the following steps:
To change the timeout value for backups:
Command window
1 Log in to the Sentriant AG server as
2 Enter the following at the command line to increase the pg_dump timeout:
setProperty.py -m Compliance.Backup.PgDumpCmdTimeout=
Where:
<milliseconds> is the number of milliseconds that the backup will wait on the pg_dump command
before stopping and providing a process stopped message. For example, the default is 600000 (10
minutes).
3 Enter the following at the command line to increase the tar timeout:
setProperty.py -m Compliance.Backup.TarCmdTimeout=
Where:
<milliseconds> is the number of milliseconds that the backup will wait on the tar command before
stopping and providing a process stopped message. For example, the default is 60000 (1 minute).
Sentriant AG Software Users Guide, Version 5.2
Networks
3 Class B networks
8 Class B networks
126.
, either using SSH or directly with a keyboard.
root
<milliseconds>
System Administration
Hosts
262,144
512,000
<milliseconds>
361