Configuring The Microsoft Ias Radius Server; Figure 143: Ias, Register Server In Active Directory - Extreme Networks Sentriant AG Software User's Manual

802.1X Quarantine Method
5 Click OK.
6 Click Next.
7 Click Finish.
8 Install any IAS and 802.1X updates that are available.
http://www.microsoft.com/downloads/search.aspx?displaylang=en

Configuring the Microsoft IAS RADIUS Server

For an explanation of how the components communicate, see
Now that you have the RADIUS server installed, you need to log into it and perform the configuration
steps described in this section.
To configure the RADIUS server:
1 Log into the RADIUS server.
2 From the RADIUS server main window, select Start>>Settings>>Control Panel>>Administrative
Tools>>Internet Authentication Service.
3 Configure IAS to use Active Directory:
a Right-click on Internet Authentication Service (Local).
b Select Register Server in Active Directory
c Click OK if a registration completed window appears.
4 Configure the RADIUS server parameters:

Figure 143: IAS, Register Server in Active Directory

a Right-click on Internet Authentication Service (local)
260
"Sentriant AG and 802.1X" on page
(Figure 143).
Sentriant AG Software Users Guide, Version 5.2
254.