Appendix E: Ports Used In Sentriant Ag; Table 19: Ports In Sentriant Ag - Extreme Networks Sentriant AG Software User's Manual

E Ports used in Sentriant AG
The following table provides information about Ports used in Sentriant AG:

Table 19: Ports in Sentriant AG

Port Parties
Ports used for testing endpoints:
88 (TCP) Endpoint to
89 (TCP) ES
53 (TCP) Endpoint to
53 (UDP) ES
3128 (TCP) Endpoint to
ES
137 (UDP) ES to endpoint
138 (UDP)
139 (TCP)
445 (TCP) ES to endpoint
1500 (TCP) ES to endpoint
1500 (TCP) ES to endpoint
Ports used by the admin user browser:
443 (TCP) Admin user
browser to MS
Sentriant AG Software Users Guide, Version 5.2
Description
When using agent-based testing, the
endpoint must point (using a browser
window) to destination port 88 on the
ES for testing, which is redirected to
destination port 89 (end-user access
screens) on the ES.
Domain Name Server (DNS). When an
endpoint is quarantined in DHCP mode,
it uses the ES for its name server.
Any endpoint configured to use an
autoproxy (DHCP endpoint enforcement
mode only), and when using agent-based
testing and static routes, the destination
3128 (squid) on the ES.
port is
These ports are opened by default when
File and Print Sharing is enabled, but
are not used by Sentriant AG.
This port is first used for NMB lookup
(identify yourself) on Windows endpoints.
If this port is not open, the endpoint
cannot be tested.
Then, this port is used for testing
endpoints with the Agentless method.
NOTE: This port is opened by default
when File and Print Sharing is
enabled.
Ports used for testing endpoints with the
Agent-based method.
Ports used for testing endpoints with the
ActiveX method.
The administration user interface (as
opposed to the end user access screens)
uses port 443 on the MS for
communication.
Comments
Not configurable
Not configurable
Not configurable
Configure on the firewall/
router between ES and
endpoint
Configure on the firewall/
router between ES and
endpoint
Configure on the firewall/
router between ES and
endpoint
Configure on the firewall/
router between ES and
endpoint
Not configurable
457