DHCP Plug-in
NOTE
Changes made while one or more DHCP servers cannot be communicated with will be sent to those DHCP servers as
soon as communication is re-established.
3 Select Add a DHCP plug-in configuration. The Add DHCP plug-in configuration window appears
as shown in the following figure:
Figure 202: Add DHCP Plug-in Configuration
4 Enter the IP address or host name of the DHCP server where the plug-in is to be installed in the
DHCP server hostname or IP address text box.
5 Enter the port number on the DHCP server that listens for plug-in requests in the Plug-in listening
port text field.
6 Enter a brief description of this DHCP server's purpose in the Server description text field.
7 Select a Plug-in logging level, where:
error—Log error-level messages only (least amount of detail)
■
warning—Log warning-level and above messages only
■
info—Log debug-level and above messages only
■
debug—Log everything (most amount of detail)
■
CAUTION
Setting the log level to debug may adversely affect performance.
346
Sentriant AG Software Users Guide, Version 5.2