Extreme Networks Sentriant AG Software User's Manual page 183

1 Select File and Print Sharing. (Verify that the check box is also selected.)
2 Click Edit.
3 Verify that the check boxes for all four ports are selected.
4 Select TCP 139.
5 Click Change Scope.
6 Select Custom List.
7 Enter the Sentriant AG Server IP address and the
8 Click OK.
9 Select UDP 137.
10 Click Change Scope.
11 Select Custom List.
12 Enter the Sentriant AG Server IP address and the
13 Click OK.
14 Select TCP 445.
15 Click Change Scope.
16 Enter the Sentriant AG Server IP address and the
17 Click OK.
18 Select UDP 138.
19 Click Change Scope.
20 Enter the Sentriant AG Server IP address and the
21 Click OK.
22 Click OK.
23 Click OK.
NOTE
You can add more security by specifying the endpoints allowed for File and Print Sharing as follows:
Select File and Print Sharing, Click Edit, Select Change Scope, and select either My Network or Custom List (and
then specify the endpoints).
Sentriant AG Software Users Guide, Version 5.2
mask.
255.255.255.0
mask.
255.255.255.0
mask.
255.255.255.0
mask.
255.255.255.0
End-user Access
183