Extreme Networks Sentriant AG Software User's Manual page 282

802.1X Quarantine Method
NOTE
The realm NULL section must go after the realm LOCAL section, or you can comment out the realm LOCAL section.
2 Configure your RADIUS server to allow the Sentriant AG IP address as a client with the shared
secret specified in the previous step. See your RADIUS server's documentation for instructions on
how to configure allowed clients.
3 Configure the
VLANS. See comments in the following sample file for instructions.
#
# FreeRADIUS Connector configuration file
#
#
# TO DO - Change localhost to your server's IP if this is not the built-in
FreeRADIUS server
#
ServerUrl=https://localhost/servlet/AccessControlServlet
DebugLevel=4
Debug=on
Username=nacuser
Password=nacpwd
#
# TO DO - Modify the vlan ids and names to match your switch configuration
#
#
# Use these attributes for all non-Extreme switches
#
#
# Uncomment these two sections if you want the connector to specify the normal user
vlan
# rather than specifying it for each user in the users configuration file.
#
#"HealthyRadiusAttributes"
# Tunnel-Medium-Type := 6,
# Tunnel-Private-Group-ID := 50,
# Tunnel-Type := VLAN,
#
#"CheckupRadiusAttributes"
# Tunnel-Medium-Type := 6,
# Tunnel-Private-Group-ID := 50,
# Tunnel-Type := VLAN,
282
SAFreeRADIUSConnector.conf
file with the appropriate RADIUS attributes and
Sentriant AG Software Users Guide, Version 5.2