DHCP Plug-in
9 Click Next. The Ready to Install the Program window appears.
Figure 200: DHCP Plug-in Ready to Install the Program window
10 Click Install. The progress is displayed on a Status window. When installation is complete, the
InstallShield Wizard Complete window appears.
Figure 201: DHCP Plug-in InstallShield Wizard Complete window
11 Click Finish.
Enabling the Plug-in and Adding Servers
To enable the DHCP plug-in and add the DHCP servers:
Home window>>System configuration>>Quarantining
1 Select the DHCP radio button in the Quarantine area.
2 Select the DHCP servers using the DHCP plug-in radio button
(Figure
197).
345
Sentriant AG Software Users Guide, Version 5.2