Immediately Quarantine An Endpoint; Clearing Temporary Endpoint States - Extreme Networks Sentriant AG Software User's Manual

NOTE
To quarantine again, select the endpoint, click change access, select Clear temporary access control status, and
click ok.
NOTE
If an endpoint that has been granted or denied access temporarily by the administrator disconnects, the next time
the endpoint attempts to connect it will be retested; the previous temporary status no longer applies.

Immediately Quarantine an Endpoint

To immediately quarantine an endpoint:
Home window>>Endpoint activity
1 Select a box or boxes to select the endpoints of interest.
2 Click change access.
3 Select the Temporarily Quarantine for radio button.
4 Select minutes, hours, or days from the drop-down list.
5 Enter the number of minutes, hours, or days that the endpoint will be temporarily quarantined.
6 Click ok.
NOTE
To quarantine again, select the endpoint, click change access, select Clear temporary access control status, and
click ok.

Clearing Temporary Endpoint States

Endpoints can have a temporary state designated through the Quarantine for or Allow access for radio
buttons.
To clear a temporary state set by the admin:
Home window>>Endpoint activity
1 Select a box or boxes to select the endpoints of interest.
2 Click change access.
3 Select the Clear temporary access control status radio button.
Sentriant AG Software Users Guide, Version 5.2
Endpoint Activity
159