Epicenter Database - Extreme Networks EPICenter Guide Manual

Troubleshooting
In Internet Explorer, clear cache by selecting Internet Options under the Tools Menu, then clicking Delete
Files under the Temporary Internet Files section of the General tab.
Problem: Cannot cut, paste or print from the browser-based client, or save to the local file system.
As of EPICenter 4.0 the browser-based client no longer supports cut/paste/print or save from the
browser-based client. These functions are supported only in the stand-alone client application.

EPICenter Database

Problem: DBBACKUP utility will not run if LD_LIBRARY_PATH variable is not set correctly
In order for DBBACKUP to run, the LD_LIBRARY_PATH environment variable must include the path
<install_dir>/database
directory. (10051)
Problem: Database server will not restart after incorrect shut down
If the EPICenter server is shut down incorrectly, the database may be left in an invalid state. In this case,
an "Assertion failed" error may occur when attempting to restart the server.
To recover the database in Windows 2000 or Windows XP, do the following:
1 Open a DOS command window.
The following commands assume you have accepted the default installation location,
c:\Program Files\Extreme Networks\EPICenter 5.0
location, substitute the correct installation directory in the commands below.
2 Go to the EPICenter install directory:
cd c:\Program Files\Extreme Networks\EPICenter 5.0
3 Add the EPICenter database directory to your path:
set path=c:\Program Files\Extreme Networks\EPICenter 5.0\database;%path%
4 Execute the following command:
database\dbeng9.exe -f basecamp.db
5 Watch the output from this command. If the database program indicates it cannot recover the database,
delete the database log:
del basecamp.log
and try executing the previous command again:
database\dbeng9.exe -f basecamp.db
6 If the database is successfully recovered, restart the server.
If the database cannot be recovered, you will need to restore the database from a backup. See
Appendix C in the EPICenter Reference Guide for instructions on restoring the database from a backup.
To recover the database in Solaris, do the following:
1 Open a shell window (csh is used for the following example).
The following commands assume you have accepted the default installation location,
/opt/extreme/epc5_0
installation directory in the commands below.
168
(by default,
/opt/epc_30/database
. If you have installed EPICenter in a different location, substitute the correct
). There are some needed
. If you have installed EPICenter in a different
files in that
.so
EPICenter Concepts and Solutions Guide