Extreme Networks ExtremeWare XOS Command Reference Manual page 144

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
Commands for Managing the Switch
Example
The following command specifies a target parameters entry named P1, a user name of guest, message
processing and security model of SNMPv2c, and a security level of no authentication:
configure snmpv3 add target-params P1 user guest mp-model snmpv2c sec-model snmpv2c
sec-level noauth
History
This command was first available in ExtremeWare XOS 10.1.
The and parameters were added in ExtremeWare XOS 11.0.
hex_param_name hex_user_name
Platform Availability
This command is available on all platforms.
144
ExtremeWare XOS 11.5 Command Reference Guide