Introduction; About This Document; Audience - Dell Networking 7048 Configuration Manual

Powerconnect 7000 series switch

Hide thumbs Also See for Networking 7048:

Table of Contents

Introduction

The switches in the Dell PowerConnect 7000 Series are stackable Layer 2

and 3 switches that extend the Dell PowerConnect LAN switching product

range. These switches include the following features:

1U form factor, rack-mountable chassis design.

Support for all data-communication requirements for a multi-layer switch,

including layer 2 switching, IPv4 routing, IPv6 routing, IP multicast,

quality of service, security, and system management features.

High availability with hot swappable stack members.

The PowerConnect 7000 Series includes six switch models: PC7024,

PC7024P, PC7024F, PC7048, PC7048P, and PC7048R/PC7048R-RA. The

PC7048R/PC7048R-RA is a top-of-rack switch. The difference between the

PC7048R and PC7048R-RA is the airflow direction.

This guide describes how to configure, monitor, and maintain a Dell

PowerConnect 7000 Series switch by using web-based Dell OpenManage

Switch Administrator utility or the command-line interface (CLI).

This guide is for network administrators in charge of managing one or more

PowerConnect 7000 Series switches. To obtain the greatest benefit from this

guide, you should have a basic understanding of Ethernet networks and local

area network (LAN) concepts.

Introduction

Show Quick Links

Table of Contents