System Leds - Dell Networking 7048 Configuration Manual

System LEDs

The system LEDs for the PowerConnect 7000 Series switches are located on
the right side of the front panel. The system LEDs indicate whether the
switch is the stack master and provide information about the status of system
diagnostics, switch temperature and power.
The system LEDs on the front panel of the switch depend on the switch
model. Figure 3-14 shows the LEDs available on each model in the
PowerConnect 7000 Series.
Figure 3-14. System LEDs
M MPS Fan
PC7024
PC7024F
PC7048
Table 3-8 contains the System LED definitions.
Table 3-8. System LED Definitions
LED Color
Status Green solid
Green blinking Booting, and the diagnostics test is in progress.
Red solid
Red blinking
FAN Green solid
Red solid
M EPS Fan
PC7024P
PC7048P
Definition
Switch is operating normally.
Critical system error detected.
Non-critical system error detected.
Fans are operating normally.
One or more fans have failed.
M PWR2 Fan
PC7048R
Hardware Overview
99